The clinical evaluation of the serum SCC antigen levels with "SCC RIABEAD" by immunoradiometric assay

The clinical significance of serum SCC antigen level was evaluated by the monoclonal antibody method (SCC.RIABEAD Dinabot Co. Ltd). Patients with squamous cell carcinoma showed a high positive SCC antigen level and positive rate elevated with the advance of the clinical stage. The serum SCC antigen level was decreased by treatment, and it increased again before obvious clinical recurrence was recognized. The results suggest that measurement of serum SCC antigen level is useful as a follow up of cancer treatment.     

Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004     

Viscosity behavior of silica suspensions flocculated by associating polymers

Associating polymers are hydrophilic long-chain molecules containing a small number of hydrophobic groups, and act as flocculants in aqueous suspensions. The effects of associating and nonassociating polymers on viscosity behavior are studied for silica suspensions. Since flocculation is induced by polymer bridging, the viscosity behavior is converted from Newtonian to shear-thinning profiles. The additions of surfactant cause an increase in viscosity for suspensions prepared with associating polymer, whereas the flow behavior of suspensions with nonassociating polymer is not significantly influenced. In adsorption of associating polymers onto silica particles, the chain may adopt a conformation with a water-soluble backbone attached to the particle surfaces. The hydrophobic groups extending from the chains adsorbed onto different particles can form a micelle by association with surfactant. Therefore, the bridging flocculation is enhanced by surfactant. The cooperative micellar formation between associating polymer and surfactant is responsible for viscosity increase in suspensions.     

Efficient syntheses of naturally occurring 3,4-dihydroxyprolines: Electrophile-mediated lactonization of 2-amino-3-hydroxy-4-pentenoic acid derivatives

Stereospecific conversion of β-hydroxyallylglycine derivatives into (2$\text{S}$, 3$\text{R}$, 4$\text{R}$) 1 and (2$\text{S}$, 3$\text{S}$, 4$\text{S}$) 2 $\text{via}$ halo- or mercuri-lactonization has been described.     

Alkaline and enzymatic degradation of L-lactide copolymers, 1. Amorphous-made films of L-lactide copolymers with D-lactide, glycolide, and epsilon-caprolactone

Films of poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] and L-lactide copolymers with glycolide [P(LLA-GA)(81/19)], epsilon-caprolactone [P(LLA-CL)(82/18)], D-lactide [P(LLA-DLA)(95/5), (77/23), and (50/50)] were prepared and a comparative study on the effects of comonomer type and content on alkaline and proteinase K-catalyzed hydrolyses of the films was carried out. The hydrolyzed films were investigated using gravimetry (weight loss and water absorption), differential scanning calorimetry (DSC), polarimetry, and gel permeation chromatography (GPC). To exclude the effects of molecular weight and crystallinity on the hydrolysis, the films were prepared from polymers having similar molecular weights and made amorphous by melt-quenching. It was found that incorporation of hydrophilic glycolide units in L-lactide chains raises the alkaline and enzymatic hydrolyzabilities, whereas incorporation of hydrophobic epsilon-caprolactone units in L-lactide chains reduces the alkaline and enzymatic hydrolyzabilities. On the other hand, incorporation of D-lactide units with the same hydrophilicity of L-lactide units increases the alkaline hydrolyzability but decreases the enzymatic hydrolyzability. The alkaline hydrolyzability of the films of L-lactide copolymers with different kinds of comonomers and P(LLA-DLA) with different D-lactide unit contents can be closely related to their hydrophilicity. On the other hand, the enzymatic hydrolyzability of L-lactide copolymer films with different kinds of comonomers is mainly determined by hydrophilicity, while that of P(LLA-DLA) films is determined by the averaged L-lactyl and D-lactyl unit sequence lengths. The catalytic effect of proteinase K relative to that of alkali on the hydrolysis of P(LLA-DLA)(77/23) and P(LLA-GA)(81/19) films normalized by that of PLLA was lower than unity, whereas the normalized relative catalytic effect of proteinase K on the hydrolysis of P(LLA-CL)(82/18) film was higher than unity, meaning that despite low absolute alkaline and enzymatic hydrolyzability of the P(LLA-CL)(82/18) film, the catalytic effect of proteinase K may be maintained for this copolymer film, probably because of its blocky structure.     

Synthesis of the serine equivalent, (2R) and (2S)-amino-3-butenol derivatives. Synthetic approaches to the metal chelating poly-amino acid, “aspergillomarasmine A”

Chiral synthons, equivalent to the C₃ amino acid serine, were synthesized in both (2$\text{R}$) and (2$\text{S}$) form from $\text{D}$ or $\text{L}$-methionine respectively; Utilization of this synthon in the construction of metal chelating poly-amino acid aspergillomarasminea A skeleton is presented.     

Photochemical behavior of azobenzene-conjugated CoII, CoIII, and FeII bis(terpyridine) complexes

Azobenzene-conjugated mononuclear and dinuclear terpyridyl complexes of Co(II), Co(III), and Fe(II) were synthesized, and their photoisomerization behavior was investigated. Co(II) and Co(III) complexes, [tpyCo(tpy-AB)]X(n) and [(Cotpy)(2)(tpy-AB-tpy)]X(n) (tpy-AB = C(15)N(3)H(10)-C(6)H(4)-N=NC(6)H(5), tpy-AB-tpy = C(15)N(3)H(10)-C(6)H(4)-N=NC(6)H(4)-C(15)N(3)H(10), X = PF(6) or BPh(4)), exhibit trans-to-cis photoisomerization by irradiation at 366 nm, and this behavior is dependent on solvents and counterions. For the Co(II) complexes, BPh(4) salts undergo cis-to-trans isomerization in propylene carbonate by both photoirradiation with visible light (435 nm) and heat, indicating that reversible trans-cis isomerization has occurred. [Co(tpy-AB)(2)](BPh(4))(2) shows a two-step trans-to-cis isomerization process. The trans-cis isomerization behavior of Co(III) complexes was observed only in the solvents with a low donor number such as 1,2-dichloroethane. Fe(II) complexes, [tpyFe(tpy-AB)]X(n) (X = PF(6) or BPh(4)), exhibit slight trans-to-cis photoisomerization due to the energy transfer from the azobenzene moiety to Fe(tpy)(2) moieties.